1. Easy installation. No external power supply or circuit is needed. It can be firmly installed by epoxy glue or screws.
2. Energy saving. Low power consumption and solar energy.
3. Early warning effect is good. All LEDs can be actively illuminated and perform better at high brightness.
4. Strong and durable. The mold is pressed once with the mold, and no further assembly is required to improve the compressive strength.
5. Long working hours. When fully charged,Sustainable working more than 15 days 12h per night.
ALLTOP high-brightness reflective LED flash road marking solar stud
Item No | 07119B3--04 | 07119B3--03 | 07119B3--01 |
Lamp Size | 103*122 mm | 103*122 mm | 103*122 mm |
LED Lamp | Straw Hat LED 6PCS 0.24W | ||
Solar Panel | 2.5V 0.3W, Polycrystalline | ||
Battery Type | 1.2V 600mAH NI-MH Resistant High Temperature Battery | ||
LED beam angle | 30 | ||
Visible distance | 500m | ||
Flashing mode | Chang Liang | ||
Discharging time | Sustainable working more than 15 days 12h per night | ||
Charging time | 6-8 hours | ||
Product load-bearing weight | Shell static load-bearing 20T | ||
Material | Die-casting aluminium alloy | ||
Warranty | 3 years |
Item No | 07119C4-01 |
Lamp Size | 100*100*20mm |
Material | ABS plastic |
Color | Yellow, White, Custom |
Type | Double side |
Weight | 105 g |
Usage | Road Safety Road Marking |
Reflector material | Imported PMMA |
Certificate | CE, ROHS, IP68 |
Working mode | Steady Double-side |
Warranty | 3 years |